Brembo 300 Gen 2 Disc & Bracket kit.Fits - All Capri hubs (not 3 litre) without modification

Also fits Mk 1 & 2 Escort hubs as well as Cortina of the same design.

Uses the Focus RS / Fiat Turbo Coupe / Alfa GTA calipers with 130mm bolt centres.

Please do not confuse Brembo calipers with the "mickey mouse" stuff out there.

High-end manufacturers continue to use them for very good reason.

Will require 15" wheels as a minimum.

As well as this kit, you will need -

• A pair of calipers which will need to be converted to run the other way up.(swap the bleed nipples and link pipe to other ends)
  
• Pads of course
  
• Caliper to strut pipes - available at £5 - ask
  
• Depending on your wheels - longer studs and wheel location caps -
  

Rear discs is a must with this kind of power on the front.